Код: Выбрать все
////-===Modifed by Gansta-Girs====- good wok with huge app part///
#include "OV2640.h"
#include <WiFi.h>
#include <WebServer.h>
#include <WiFiClient.h>
#include <AutoWifi.h>
#include "SimStreamer.h"
#include "OV2640Streamer.h"
#include "OV2640.h"
#include "CRtspSession.h"
const char* ssid = "Gansta-Paradise.com";
const char* password = "123412345";
// This board has slightly different GPIO bindings (and lots more RAM)
// uncomment to use
// #define USEBOARD_TTGO_T
#define USEBOARD_AITHINKER
#ifndef USEBOARD_AITHINKER
#define ENABLE_OLED //if want use oled ,turn on thi macro
#endif
// #define SOFTAP_MODE // If you want to run our own softap turn this on
#define ENABLE_WEBSERVER
///#define ENABLE_RTSPSERVER
#ifndef USEBOARD_AITHINKER
// If your board has a GPIO which is attached to a button, uncomment the following line
// and adjust the GPIO number as needed. If that button is held down during boot the device
// will factory reset.
#define FACTORYRESET_BUTTON 32
#endif
OV2640 cam;
#ifdef ENABLE_WEBSERVER
WebServer server(80);
#endif
#ifdef ENABLE_RTSPSERVER
WiFiServer rtspServer(8554);
#endif
#ifdef SOFTAP_MODE
IPAddress apIP = IPAddress(192, 168, 1, 1);
#else
#endif
#ifdef ENABLE_WEBSERVER
void handle_jpg_stream(void)
{
WiFiClient client = server.client();
String response = "HTTP/1.1 200 OK\r\n";
response += "Content-Type: multipart/x-mixed-replace; boundary=frame\r\n\r\n";
server.sendContent(response);
while (1)
{
cam.run();
if (!client.connected())
break;
response = "--frame\r\n";
response += "Content-Type: image/jpeg\r\n\r\n";
server.sendContent(response);
client.write((char *)cam.getfb(), cam.getSize());
server.sendContent("\r\n");
if (!client.connected())
break;
}
}
void handle_jpg(void)
{
WiFiClient client = server.client();
cam.run();
if (!client.connected())
{
return;
}
String response = "HTTP/1.1 200 OK\r\n";
response += "Content-disposition: inline; filename=capture.jpg\r\n";
response += "Content-type: image/jpeg\r\n\r\n";
server.sendContent(response);
client.write((char *)cam.getfb(), cam.getSize());
}
void handleNotFound()
{
String message = "Server is running!\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET) ? "GET" : "POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
server.send(200, "text/plain", message);
}
#endif
void lcdMessage(String msg)
{
#ifdef ENABLE_OLED
if(hasDisplay) {
display.clear();
display.drawString(128 / 2, 32 / 2, msg);
display.display();
}
#endif
}
void setup()
{
#ifdef ENABLE_OLED
hasDisplay = display.init();
if(hasDisplay) {
display.flipScreenVertically();
display.setFont(ArialMT_Plain_16);
display.setTextAlignment(TEXT_ALIGN_CENTER);
}
#endif
lcdMessage("booting");
Serial.begin(9600);
while (!Serial)
{
;
}
int camInit =
#ifdef USEBOARD_TTGO_T
cam.init(esp32cam_ttgo_t_config);
#else
#ifdef USEBOARD_AITHINKER
cam.init(esp32cam_aithinker_config);
#else
cam.init(esp32cam_config);
#endif
#endif
Serial.printf("Camera init returned %d\n", camInit);
IPAddress ip;
#ifdef SOFTAP_MODE
const char *hostname = "devcam";
// WiFi.hostname(hostname); // FIXME - find out why undefined
lcdMessage("starting softAP");
WiFi.mode(WIFI_AP);
WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0));
bool result = WiFi.softAP(hostname, "12345678", 1, 0);
if (!result)
{
Serial.println("AP Config failed.");
return;
}
else
{
Serial.println("AP Config Success.");
Serial.print("AP MAC: ");
Serial.println(WiFi.softAPmacAddress());
ip = WiFi.softAPIP();
}
#else
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Serial.print(F("."));
}
ip = WiFi.localIP();
Serial.println(F("WiFi connected"));
Serial.println(ip);
#endif
lcdMessage(ip.toString());
#ifdef ENABLE_WEBSERVER
server.on("/", HTTP_GET, handle_jpg_stream);
server.on("/jpg", HTTP_GET, handle_jpg);
server.onNotFound(handleNotFound);
server.begin();
#endif
#ifdef ENABLE_RTSPSERVER
rtspServer.begin();
#endif
}
CStreamer *streamer;
CRtspSession *session;
WiFiClient client; // FIXME, support multiple clients
void loop()
{
#ifdef ENABLE_WEBSERVER
server.handleClient();
#endif
#ifdef ENABLE_RTSPSERVER
uint32_t msecPerFrame = 100;
static uint32_t lastimage = millis();
// If we have an active client connection, just service that until gone
// (FIXME - support multiple simultaneous clients)
if(session) {
session->handleRequests(0); // we don't use a timeout here,
// instead we send only if we have new enough frames
uint32_t now = millis();
if(now > lastimage + msecPerFrame || now < lastimage) { // handle clock rollover
session->broadcastCurrentFrame(now);
lastimage = now;
// check if we are overrunning our max frame rate
now = millis();
if(now > lastimage + msecPerFrame)
printf("warning exceeding max frame rate of %d ms\n", now - lastimage);
}
if(session->m_stopped) {
delete session;
delete streamer;
session = NULL;
streamer = NULL;
}
}
else {
client = rtspServer.accept();
if(client) {
//streamer = new SimStreamer(&client, true); // our streamer for UDP/TCP based RTP transport
streamer = new OV2640Streamer(&client, cam); // our streamer for UDP/TCP based RTP transport
session = new CRtspSession(&client, streamer); // our threads RTSP session and state
}
}
#endif
}
у меня такой в умном доме,кучу времени потратил чтобы нормально заработало,постоянно зависало,вылетал поток итд....